New
Array White Cyan by Hussar Vapes
Array White Cyan by Hussar Vapes
Array White Cyan by Hussar Vapes Array White Cyan by Hussar Vapes Array White Cyan by Hussar Vapes

Array White Cyan by Hussar Vapes

By buying this product you can collect up to 43 loyalty points.


Array White Cyan by Hussar Vapes

More details

389,90 €

 

Array White Cyan by Hussar Vapes

Dimensions:

Length: 24,5 mm
Width: 46 mm
Height: 78 mm

Features:

- MM ClickFet V1 (Specs Below)
- Nano Series V2 510 Connector from Steelabs
- 8ml Gatling Bottle System from Moddog
- Gold Plated Connection Plates
- No Wires used for connections

Materials:

- Aluminum plates/panels
- Brass - gold plated elements to achive the best conductivity.
- Delrin SandBlasted Body and isolator

Warranty:

- We offer a lifetime warranty for Array.

MM ClickFet V1 Specification (ModMaker site):

ClickFet v1 is an un-regulated board for use with up to 4.2v battery configurations and designed to fit in the smallest space possible. It has a built in N-channel mosfet capable of up to 100A current, 2 x blue LED and an intelligent chip to provide the on / off feature, low voltage detection, timeout and short protection. ClickFet v1 also has reverse polarity protection to protect the board.

Specifications:

- Dimensions: With Switch: 15mm x 12mm / Without Switch: 11mm x 10.5mm,
- Mosfet: N-Channel 30v 100A LFPAK, RDSon 1.35m Ω (typ), VGS(th) 1.46V (typ),
- Operational voltage: 3.1 ± 0.1V - 4.20V,
- Low voltage protection: 3.1 ± 0.1V,
- Reverse polarity protection: Yes. Mod will auto fire but board will not burn out,
- Idle current: <10uA,
- Timeout Protection: Yes,
- Amp Limit: 46.67A (4.2v @ 0.09Ω).

Functions and LED Information:

- Low Resistance Protection: When resistance is 0.08 ± 0.01Ω LED's flash 3 times and will not power the mosfet. This is also Short Protection,
- On/Off Function: When off, 5 clicks turns on and LED's flash 5 times. When on, 5 clicks turns off and LED's flash 5 times,
- Low Voltage: When battery is lower than 3.1 ± 0.1V LEDs flash 10 times and will not power the mosfet,
- Time Out Protection: If the mod is fired for 10 ± 1s the LED's will flash 8 times and will stop powering the mosfet,
- Reverse Polarity Protection. If the battery is around the wrong way the mod will fire